Shock Freezing Chamber FastCold BCFG 1/1-T1

Model description

• Chamber with a floor (the chamber floor is made in the form of a four-layer sandwich panel: sheet AISI 304 stainless steel, 9 mm plywood, insulation - polyurethane foam, AISI 304 stainless steel).
• The walls of the chamber are made of three-layer sandwich panels 80 mm thick, interconnected by tie locks.
• The outer skin is made of galvanized steel with a polymer coating of white color.
• The inner lining of the chamber is made of food-grade AISI 304 stainless steel. There is a tray for collecting condensate from the evaporator, and there is an outlet for drainage in the wall panel.
• The door has a right or left hinge arrangement (optional), with a perimeter seal.
• The swivel design of the fan panel provides access during servicing.
• The chamber condensate drain is made of a flexible hose.
• The electronic control unit is mounted on the upper frieze.
• Control over the temperature regime of the cooled and frozen products is carried out by the probe sensor installed directly in the product, or by the set time.
• The refrigerant used is R404A.

Standard equipment:

• Chamber
• Condensing unit based on the semi-hermetic compressor Bitzer and condenser (Italy)
• Specialized evaporation system for intensive cooling and freezing
• Control unit, complete with remote control panel (Italy)
• Temperature probe sensor for monitoring the cooling and freezing process
• Accessories of a premium class of the European manufacturer

Additional Available Options:

• external communication from AISI 304 stainless steel
• heated ramp
• legs adjustable h 150mm
• without floor (stainless steel tray 2 mm thick mounted on a heat-insulating plastic gasket)
• built-in guides up to 25 levels for baking sheets 600x400mm or GN 1/1 gastronome containers
• AISI 304 stainless steel trolley of 20, 25 and 25 levels for GN containers 1/1 or baking sheets 600 * 400mm
• baking sheets from food AISI 304 stainless steel 600 * 400 mm
• UV-lamp for disinfection of the room
• wooden box packaging for transportation over long distances

Technical specifications